Composites: Driving forward carbon emission goals with automotive composites

The popularity of composites use in electric vehicle parts is hinged on the global impetus of lowering carbon impact of road transport, says Angelica Buan in this report.

Road transport accounts for 17% of global carbon emissions, according to the United Nations’ climate change report, and so it is imperative that the automotive industry must transition to low carbon vehicles that correspond to the global climate protection goals, such as keeping the global average temperature below 2°C preindustrial levels. The ambitious goal, however, can be achieved by making basic changes; starting from improving the fuel efficiency of vehicles.

Light weight in vehicles translates to fuel efficiency. This, thus, spurs the demand for composite materials for automotive applications. The market for automotive composites is projected to cross US$10.2 billion by 2025, as suggested in a Global Industry Analyst report.

Of the composite types, thermoplastics and reinforced fibre-glass are garnering favour from automotive makers as materials that deliver the light weight and tensile strength required for fuel economy.

In this regard, electric and hybrid vehicles that are posting increasing adoption, are driving consumption for composites, especially for the reduction of weight from batteries and hybrid powertrains.

Revolutionary processes in full gear

In a near future scenario, the large scale adoption for automotive composites may press for a reliable as well as cost-effective supply of the materials. Recently, new facilities and technologies are being made available to produce composites and to ensure that automotive makers can optimise the benefits of using these materials.

UK-headquartered composites components manufacturer TRB Lightweight Structures is opening a composites manufacturing centre in Richmond, Kentucky, US, as a joint venture with US-based distribution company Toyota Tsusho America. The approximately 3, 716 sq m facility will be equipped with robotics to allow high volume production of carbon fibre components using TRB’s press-forming process, initially for automotive applications for the North American market.

Solvay’s DDF can enable the automotive

TRB’s production process allows carbon fibre to be press-formed using advanced industrial robotics, thus allowing components to be manufactured at a similar price point to equivalent aluminium parts.

Belgian chemicals company Solvay, for its part, has introduced its Double Diaphragm Forming (DDF) automated demonstrator line located at its Heanor, UK site. The fully automated line, combined with Solvay’s fast curing technologies, goes from raw material to cured parts within a 3-minute takt time, opening new opportunities for high rate composite part manufacture. Just like Solvay’s fast cure prepregs, the DDF can enable the automotive, as well as the aerospace, industries to ramp up their production of cost-effective composite parts.

Tougher and better than steel

Apart from weight savings, composite materials offer structural advantage that is comparable to steel and other injection moulded vehicle parts; plus cost reduction benefits and recyclability.

Using composites from Kingfa

In undertaking sampling of composites for its vehicles, Ford Motors obtains materials, for the mass production of the door module carrier for its compact Ford Focus, from Kingfa Sci & Tech Co and its subsidiary, Guangzhou Kingfa Carbon Fibre Materials Development.

Kingfa has worked closely with German system supplier Brose Fahrzeugteile to develop its new continuous fibre-reinforced material called KingPly. Brose designed the door module carrier with considerable weight savings of about 35%, compared to a standard injection-moulded door module carrier and reduced the car weight of the four-door Ford Focus model by more than 1 kg, compared to a PP-LGF30 door module carrier. And compared to a standard metal door concept without the plastic carrier, the composite design could reduce the car weight by more than 5 kg.

The new composite materials are based on UD layers. In the case of the door module, a thin but strong multi-layer material is composed to give the part stiffness and strength, Kingfa said.

The door module has many requirements, namely, stiffness, strength, noise & vibration (NVH), acoustics and also sealing, as the carrier is on the division line between dry and wet within the door structure. The usual material is a PP matrix and continuous glass fibre as reinforcement. The sheets are cut to the exact dimensions needed in the injection moulding tool, so that no cutting and waste is generated during production.

On another note, composites are being used for batteries of electric vehicles to lower the weight. Germany-headquartered manufacturer of carbon products SGL Carbon has been commissioned by a North American automotive maker for composite battery enclosures. The enclosures’ top and bottom layers are to be made with carbon and fibreglass composites, and assembled components come from SGL Carbon’s fully integrated chain.

SGL Carbon also said that it has won a smaller volume contract from a European sports car manufacturer to serially produce bottom layers made of composite as of mid-2020. The company is additionally in talks with further automotive makers to develop and manufacture battery enclosure solutions for their electric car platforms.



Subscribe to Get the Latest Updates from IMA  Please click here

Copyright (c) 2020 www.injectionmouldingasia.com. All rights reserved.